Guide · Month-end close

Month-end close checklist for accounting firms: a per-client playbook.

A day-by-day close checklist for firms running QuickBooks Online and Xero client files, with where AI helps, where the accountant signs off, and how to lock each period.

Why firms need their own checklist

One company takes six days. A firm closes forty.

The median finance team takes 6.4 calendar days to close its books each month (APQC benchmarking, cited by Trullion). That is one company. An accounting firm runs the same close for twenty, forty or a hundred client files, often with the same small team, and every day a close runs late is a day the client waits for numbers they needed last week.

A month-end close checklist is how a firm stops relying on memory. Most published checklists are written for an in-house controller closing one entity. This one is built for a portfolio of client files in QuickBooks Online and Xero.

The short answer

What a month-end close checklist should include.

A month-end close checklist should cover five stages, in order: clear and record all transactions for the period, reconcile every bank, card and balance sheet account, post accruals, deferrals and other adjusting entries, review the financial statements for variances, and lock the period before delivering reports. Each task needs an owner, a due day and a reviewer.

The order matters. Errors in an early step carry forward, and running steps out of sequence is the most common reason a close has to be redone. Reconciling before the bank feed is cleared, or reviewing the P&L before accruals are in, means doing the work twice.

For a firm, two more fields belong on every line: which client file it applies to, and whether the task is standard or specific to that client. A client with inventory, deferred revenue or multiple entities needs extra lines that a simple service business does not.

Why single-company checklists break

The delay is rarely the work. It is the person who knows the file.

An in-house checklist assumes one chart of accounts, one set of bank accounts and one person who knows the history. A firm has none of those luxuries. Each client has its own chart of accounts, its own vendors that need special handling, and its own quirks that live in someone’s head.

Run the month-end close process from two layers. One is a standard checklist every client file goes through. The other is a short client-specific SOP beside it: recurring accruals, unusual vendors, and how the client wants reports delivered. When both are written down, the close stops depending on who happens to be in the office.

The checklist

The month-end close checklist, day by day.

This assumes a five business day close per client. Firms closing many files usually stagger clients across the first two weeks of the month, so the same staff are not reconciling forty files on day two.

BeforePre-close

Get what the ledger cannot show you

Send the client a request list for new loans, asset purchases, payroll changes and invoices they forgot to enter. Confirm every bank and card feed is connected and current; a broken feed found on day three costs a day. Review last month’s open items so nothing rolls forward unexamined.

Days1 to 2

Clear the bank feed and record the period

Categorize every bank feed transaction and check that rules code vendors to the right accounts and classes, not just to an account that makes the totals balance. Record invoices, payments and deposits, and clear Undeposited Funds (Payments to deposit) in QuickBooks Online. Enter or approve bills, and post or import payroll against the provider’s register.

Days2 to 3

Reconcile

Reconcile every bank, credit card and loan account to the statement balance. Investigate unmatched and duplicate transactions; duplicates from feeds and manual imports are among the most common close errors (Xenett). Tie AR and AP aging to the balance sheet, and reconcile clearing accounts, payroll liabilities and sales tax payable.

Days3 to 4

Accruals, deferrals and adjusting entries

Accrue expenses incurred but not yet billed, and revenue earned but not yet invoiced. Book prepaid amortization and deferred revenue releases from your schedules. Post depreciation and inventory adjustments. A second person reviews every manual journal entry, with support attached.

Days4 to 5

Review, lock and deliver

Compare the P&L and balance sheet with last month and the same month last year, and explain any line that moved materially. Check cutoff for revenue, cost of goods sold and payroll. A reviewer signs off, the period is locked, and the reports go out with a short note on what changed and why.

Copy this

A close checklist table for every client file.

Copy the table into your practice management tool or a shared sheet. Duplicate it for each client and add that client’s specific lines underneath.

Day and sign-offTask
Pre-close
Preparer, reviewed by Manager
Send client request list; confirm feeds connected; review last month’s open items
1 to 2
Preparer, reviewed by Manager
Clear bank feed; record invoices, payments, bills and payroll; clear Undeposited Funds
2 to 3
Preparer, reviewed by Manager
Reconcile bank, card and loan accounts; tie AR and AP aging; reconcile liabilities
3 to 4
Preparer, reviewed by Manager
Accruals, prepaids, deferred revenue, depreciation, inventory; review manual journals
4 to 5
Manager, reviewed by Partner
Flux review of P&L and balance sheet; cutoff check; sign-off
5
Manager, reviewed by Partner
Lock the period; deliver reports and commentary
AI in the close

Where AI fits in the month-end close process, and where it does not.

Most of the hours in a firm’s close go into the first three stages: coding transactions, matching them to statements and chasing the ones that do not match. That work is repetitive, follows rules and happens the same way every month, which makes it the right place for AI.

Judgment is different. Deciding whether a large unusual payment is an asset or an expense, estimating an accrual the client has not told you about, or explaining a margin swing to the owner still belongs to the accountant.

The risk firms worry about is AI writing to client books without anyone checking, so the useful setup is one where the AI proposes and the accountant approves. NumbersGame was built inside a practicing accounting firm to work this way: it codes the bank feed, flags unmatched transactions in reconciliation and proposes adjusting entries against the firm’s own close checklist, and nothing posts to QuickBooks Online or Xero until the accountant approves it.

Lock the period

Month-end close in QuickBooks Online and Xero: locking the period.

A close is not finished until the period is locked. Without a lock, a client or a team member can edit a transaction in a month you have already reported on, and the numbers you delivered quietly stop matching the ledger.

QuickBooks Online

Go to Settings, then Account and settings, then Advanced, and turn on Close the books in the Accounting section. Set the closing date to the last day of the period and require a password to change closed periods. The Exceptions to Closing Date report then shows any edits made to a closed period; check it at the start of each close.

Xero

Set lock dates under Settings, then Advanced, then Financial settings. Xero lets you set one lock date for all users except advisers and a stricter lock date for everyone, so firm staff can still post year-end adjustments while the client is locked out.

Lock each client file the same day you sign off. A period left open for a week after delivery is a period that can change after delivery.

Common mistakes

Six month-end close mistakes that show up across a client portfolio.

  • Reconciling too late. Reconciliations done on the last day leave no time to investigate, which is how plug entries appear. Reconcile by day three.
  • Missing accruals. Costs land in the wrong month and the P&L swings. Keep a recurring accrual list in each client’s SOP.
  • Duplicate transactions. Feeds, imports and manual entries record the same payment twice. Check for duplicates during reconciliation, not after.
  • Unreviewed journal entries. Manual journals posted without support or a second look cause most surprise adjustments. Require a reviewer on every one.
  • Skipping the flux review. A balance that moved for no reason is a question the client will ask later. Explain every material change before delivery.
  • Leaving the period open. Reports change after they are sent. Lock the period at sign-off.

Each of these comes from the same root: a checklist that records whether a task was done, rather than what the review found. Add a short result note to each line, not just a tick.

Questions and answers

Month-end close checklist questions, answered directly.

What should be included in a month-end close checklist?
Recording all transactions for the period, reconciling every bank, card and balance sheet account, posting accruals and adjusting entries, reviewing the financial statements for variances, and locking the period. Each task should have an owner, a due day and a reviewer.
How long should a month-end close take?
Benchmarks put the median close at about six calendar days. For a small business client with clean feeds, a firm can usually close in three to five business days. Clients with inventory, multiple entities or deferred revenue take longer.
What happens if I edit a transaction in a closed period?
In QuickBooks Online, if the books are closed with a password, the user sees a warning and must enter the password to save the change, and the edit appears on the Exceptions to Closing Date report. In Xero, users cannot edit transactions dated on or before the lock date that applies to them.
What is the difference between month-end and year-end close?
The month-end close produces accurate monthly statements. The year-end close does the same for the twelfth month and adds annual work: fixed asset review, inventory counts, tax provisions, 1099 preparation and closing income and expense accounts into retained earnings.
Why don't my subledgers match my balance sheet?
Usually because something was posted directly to the control account. A journal entry to accounts receivable, for example, changes the balance sheet without changing the aging report. Find the entries posted directly to the account and move them to the customer or vendor they belong to.
Choosing where to start

Write it down first. Automate the stage that costs the most.

If your firm closes fewer than ten clients and one person knows every file, the day-by-day checklist above is enough. Write it down, add each client’s SOP lines and lock every period at sign-off.

If you close dozens of files and the delay is in the coding and reconciliation stages, that is where automation pays back first. Keep the review and sign-off steps exactly where they are.

Related guides

More on running the close across client files.

Month-end close process for accounting firms

Client-specific procedures, live ledger data, exception-led review and accountable approval.

Run your firm’s month-end close in Claude

How a firm moves the close checklist into Claude across its QuickBooks Online clients.

What AI gets wrong in a month-end close

The confident wrong answers to watch for, and the constraints that stop them.

Bring one client file. See the close run with approval built in.

Book a working session on a real QuickBooks Online or Xero file and leave with a reconciled, reviewed close.